Our IP68/IP69 VentGLAND and VentPLUG eliminates the build-up of condensation in your enclosure or installation. Air can flow freely through a high performance ePTFE membrane. The same membrane prevents moisture, dirt and other contaminants passing through preventing the build of condensation. Available in M16, M20, M25, M32, M50 and M63 sizes in either polyamide, brass nickel-plated or stainless-steel.
Model : | Straight |
Halogen free : | Yes |
Shock resistant : | Yes |
RAL number : | 9005 |
Surface protection : | Untreated |
Wrench width : | 46mm |
Thread length : | 9mm |
Bend radius protection/trumpet flare : | No |
With strain relief : | No |
Screened : | No |
EMC-version : | No |
Glass fibre reinforced : | No |
Material qualifier : | Polyamide (PA) |
Working temperature : | -40 to 100°C |
Thread type : | Metric |
Material : | Plastic |
Pitch thread : | 1.5mm |
Explosion-tested version : | No |
Flat cable sealing : | No |
Multi cable sealing : | No |
Locknut included : | No |
Hexagon angular dimension : | 51mm |
Separable (split) screw gland : | No |
Suitable for cable outer diameter : | 0mm |
Degree of protection (IP rating) : | IP68 |
For ATEX classification, Ex-zone gas : | None |
Nominal thread size metric/PG : | 40 |
For ATEX classification, Ex-zone dust : | None |
For armoured cable : | No |
Snapping in opening : | No |