Our new ToughLED™ Pro range is the culmination of feedback from over one hundred Electrical Contractor interviews, focus sessions and install days. We watched, listened and learnt to gain an understanding of the key areas that hampered Electrical Contractors when installing traditional Weatherproof fixtures. Our Design and Development team then took this information as the brief to re-imagine all aspects of the Weatherproof range, from wiring access, IP maintenance, side clip mechanisms to simple points such as laser level and internal drilling guides. Through retention of the best elements of our previous Weatherproof range and addition of new innovative installation solutions, we have created ToughLED™ Pro. The easiest and most thought through Weatherproof design on the market.
Mounting method : | Wall surface mounted / ceiling surface mounting |
Protection class : | I |
Width : | 96mm |
Function : | Escape route lighting |
Connection type : | Other |
Housing colour : | Grey |
Voltage type : | AC |
Power supply system : | Peripheral (individual battery) |
Control gear : | LED driver constant current |
Number of poles : | 4 |
Length : | 1570mm |
Height/depth : | 81.3mm |
Housing material : | Plastic |
Light source type : | LED replaceable |
Cover material : | Plastic transparent |
Impact resistance (IK rating) : | IK08 |
Battery chemistry : | Lithium-ions |
Nominal voltage : | 220 to 240V |
Degree of protection (IP rating) : | IP65 |
Lamp included : | Yes |
With remote switch connection : | No |
Monitoring equipment : | Other |
Maximum system power : | 29W |
Rated luminous flux acc. IEC 62722-2-1 : | 4200Lm |
Constant luminous flux control : | Yes |
Type of cabling : | Suitable for through wiring |
Rated ambient temperature acc. IEC62722-2-1 : | -20 to 50°C |
Light distribution : | Diffuser |
Nominal operation time : | 0 to 3 Hour |
Replaceable control gear : | Yes |
Power factor : | 0.98 |