JCC JC121371 RGBW 2.4G RF Remote control, Hand Held

For use with JCC RGBW strip. Simple, fast installation which is easy set up when pairing with controllers. 2.4GHz RF, does not require line of site to operate and is battery operated; no wiring required. Up to 30m transmission distance and can control up to 3 different zones. Each zone can have matching scenes or a separate scene and each zone can run up to 10 controllers. Each zone can control up to 110m 17.6W RGBW or 250m 7.2W RGBW *based on 180W driver-must not exceed the maximum Wattage of the driver, with up to 30 controllers in totalUp to 375m 14.4W RGBW or 750m 7.2W RGBW * based on all 3 zones, 30 controllers -with 180W driverBuilt in memory, saves last set scene when turned offSmooth touch control to adjust colour and brightness10 dynamic pre-set modes, including 3 colour change, 7 colour change, strobe, and single colour fade options.

• For use with JCC RGBW strip
• Simple, fast installation. Easy set up and pairing with controllers
• 2.4GHz RF, does not require line of site to operate
• Battery operated; no wiring required. Up to 30m transmission distance
• Control up to 3 different zones
• Each zone can have matching scenes or a separate scene, Each zone can run up to 10 controllers
• Each zone can control up to 100m 17.6W RGBW or 250m 7.2W RGBW *based on 180W driver-must not exceed the maximum Wattage of the driver
• Up to 30 controllers in total, Up to 300m 17.6W RGBW or 750m 7.2W RGBW * based on all 3 zones, 30 controllers -with 180W driver
• Built in memory, saves last set scene when turned off
• Smooth touch control to adjust colour and brightness.10 dynamic pre-set modes, including 3 colour change, 7 colour change, strobe, and single colour fade options

• Datasheet