Toughflood is our high output commercial Led floodlight which is a direct replacement for HID equivalents. Toughflood has been designed with a galvanized bracket and integrated heat sink that can effectively control thermal management, improving performance and reliability. Up to 90 LpcW with driver less technology, instant start up and Polycarbonate Diffuser: Suitable for food preparation, 2M pre-wired H05RN-F cable for exterior applications and ADC12 die-cast aluminium body, corrosion resistant, lightweight for easier installation . Easy access installation with 55° angled Galvanized steel bracket, 110° beam angle.
Protection class : | I |
Width : | 390mm |
Reflector : | White |
Connection type : | Other |
Housing colour : | Black |
Surface protection : | Powder coated |
With movement sensor : | No |
Control gear : | Not required |
Colour rendering index (CRI/Ra) : | 70-79 |
With light sensor : | No |
Suitable for suspended mounting : | No |
Number of poles : | 3 |
Length : | 323mm |
Height/depth : | 42mm |
Housing material : | Aluminium |
Light source type : | LED non-replaceable |
Light outlet : | Direct |
Light sharing : | Symmetric |
Cover material : | Plastic transparent |
Impact resistance (IK rating) : | IK08 |
Nominal voltage : | 220 to 240V |
Degree of protection (IP rating) : | IP65 |
Lamp included : | Yes |
Luminaire may be covered with thermally insulating material : | No |
Suitable for recessed mounting : | No |
Suitable for surface mounting : | Yes |
Beam angle : | Extreme wide beam >80° |
Colour temperature : | 4000 to -K |
Maximum system power : | 200W |
Colour of light : | White |
Adjustability : | Rotatable |
Suitable for pedestal/floor mounting : | Yes |
Suitable for clamp-mounting : | Yes |
Luminous flux : | 17500 to -Lm |
Type of cabling : | Ending |
Colour consistency (McAdam ellipse) : | SDCM6 |
Rated ambient temperature acc. IEC62722-2-1 : | -20 to 40°C |
Light distribution : | Diffuser |
Luminaire efficacy : | 87 |
Suitable for ceiling mounting : | Yes |
Power factor : | 0.9 |